|
|
Design of working arm for threading machine
Řezníček, Marek ; Tůma, Jiří (referee) ; Pavlík, Jan (advisor)
The aim of this work is to propose the construction of working arm threading / drilling. Working arm provides "its" vertical position of the tool axis in the working range and reduces the force effect of cutting forces and weight. The work includes 3D models and drawings, including the calculation of the components.
|
|
|
Web Server for Protein Structure Prediction
Votroubek, Lukáš ; Očenášek, Pavel (referee) ; Burgetová, Ivana (advisor)
This work deals with proteins, especially with their structure and kinds of tertiary, or 3D, structure prediction. Tertiary structure prediction is very important for function prediction of this vitally important substance. Bioinformatics do this prediction much more effective and faster, because classical methods of structure prediction directly from molecule are very expensive and slow. On the other hand they are much more exact. Objective of this thesis is to describe tertiary structure prediction methods, describe used tools and possibility of automatic communication with them. Next objective is describe implementation of server, that will serve to protein engineers for more effective finding of information about tertiary structure from more servers without requesting each of them separately. Results of testing will be described in this work too.
|
|
|
Efficiency improvement proposal of machining specific components of pneumatic cylinders
Židlický, Ondřej ; Chladil, Josef (referee) ; Sedlák, Josef (advisor)
This Master thesis aims to increase the effectivity of the machining of pneumatic cylinders specific components. In the first chapter, the concurrent approach to the manufacture of corrosion resistant austenitic piston rod. This approach consists of the technological procedure, the analysis of the cutting tools used in the process and the cutting conditions. The machining process deals with low durability of cutting tools and the necessity of continual supervision by the operator. Therefore, an alternate design of cutting tools and cutting conditions is suggested in the next chapter. The new design has been tested in manufacture process. In the last chapter, the concurrent and the innovative approach are compared. By choosing the proper cutting tools and cutting conditions it was managed to increase the durability of cutting tools and to increase the effectivity of the whole manufacture process.
|
|
|
Bioinformatics Tool for Protein Structure Prediction
Plaga, Michal ; Burgetová, Ivana (referee) ; Martínek, Tomáš (advisor)
The goal of this thesis is test and comparation of the offline tools for prediction of protein structure and creation of metaprediktor, which allows the user to select the appropriate tool, according to given parameters. Testing tool is based on a dataset of proteins, which is based on the SCOP database and it is trying to be as balanced as possible to include proteins from different families and thus could best evaluate individual tools. The results of this thesis are requirements of metaprediktor and also which data and settings can be allowed and processed and how it will be implemented.
|
|
|
Protein Structure Prediction
Tuček, Jaroslav ; Martínek, Tomáš (referee) ; Burgetová, Ivana (advisor)
This work describes the three dimensional structure of protein molecules and biological databases used to store information about this structure or its hierarchical classification. Current methods of computational structure prediction are overviewed with an emphasis on comparative modeling. This particular method is also implemented in a proof-of-concept program and finally, the implementation is analysed.
|
|
|
Electronic notice board LCD
Bureš, Michal ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
This diploma thesis deals with the research of existing solutions of electronic information systems. The purpose of this survey is to inspire what is offered to users of these professional systems, or what users expect from these systems. Based on the acquired knowledge, the thesis also deals with the design of its own system, which can serve as another alternative to professional solutions of companies on the market, in the sense of the concept of solution of the given task. After the design of the system, the thesis deals chronologically with the selected "tools" used for the actual implementation of the assigned task Electronic Information Boards. Both hardware and software parts of the task, which form the majority of this thesis. At the end of the work are presented practical results.
|
|
|
Evaluation the properties of the cutting edge in fusion and flame cutting by solid state lasers
Dočekal, Miroslav ; Berka, Roman (referee) ; Mrňa, Libor (advisor)
The thesis compares oxidation and fusion laser cutting methods in the production of sheet components called Trager consoles. Individual methods of laser cutting are compared in terms of achieved quality and properties of cutting areas. Consequently, the effect of these properties on consecutive technological operations, which are mainly threading and pressing the nuts into components, are evaluated. In the experimental part of the thesis the roughness of cut surfaces was measured and the cuts were classified into quality classes according to the ČSN EN ISO 9013 standard. Metallographic samples were taken in order to measure hardness and determine its course in the direction from the cutting edge into the material. The metallographic samples were further used for capturing detailed images on the microscope and assessing the quality of nuts pressing. Afterwards, the cut moments affecting taps were measured in order to verify the impact of cutting edge properties on threading. These measurements provided sufficient data for comparing the influence of cutting edge properties in individual methods of laser cutting on consecutive operations. Finally, individual methods were compared in terms of production costs. According to all the data and the conclusions reached, fusion method was identified as the most suitable method of laser cutting for components manufacturing.
|
|
|
Design of end effector for automatic threading
Jiříček, Lukáš ; Kočiš, Petr (referee) ; Szabari, Mikuláš (advisor)
This bachelor’s thesis is focused on the design of the end effector intended for threading. The end effector should allow for position compensation and automatic tool change. It should be designed for cutting internal threads from size M5 to size M10 using taps. The weight of the end effector structure should not exceed 10 kg. At the beginning of the thesis, research was conducted in the field of end effectors. Furthermore, an analysis of the problem of threading was carried out. In the next part of the thesis, two variants of the end-effector solution were designed, from which the more advantageous solution was selected based on a multi-criteria analysis. A design and calculations were also made for this solution. An assembly drawing and production drawings of selected components were made to represent the design of the effector. At the end of the thesis, an economic evaluation of the end effector was made.
|
|
|
Efficiency improvement proposal of machining specific components of pneumatic cylinders
Židlický, Ondřej ; Chladil, Josef (referee) ; Sedlák, Josef (advisor)
This Master thesis aims to increase the effectivity of the machining of pneumatic cylinders specific components. In the first chapter, the concurrent approach to the manufacture of corrosion resistant austenitic piston rod. This approach consists of the technological procedure, the analysis of the cutting tools used in the process and the cutting conditions. The machining process deals with low durability of cutting tools and the necessity of continual supervision by the operator. Therefore, an alternate design of cutting tools and cutting conditions is suggested in the next chapter. The new design has been tested in manufacture process. In the last chapter, the concurrent and the innovative approach are compared. By choosing the proper cutting tools and cutting conditions it was managed to increase the durability of cutting tools and to increase the effectivity of the whole manufacture process.
|
|
|
Electronic notice board LCD
Bureš, Michal ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
This diploma thesis deals with the research of existing solutions of electronic information systems. The purpose of this survey is to inspire what is offered to users of these professional systems, or what users expect from these systems. Based on the acquired knowledge, the thesis also deals with the design of its own system, which can serve as another alternative to professional solutions of companies on the market, in the sense of the concept of solution of the given task. After the design of the system, the thesis deals chronologically with the selected "tools" used for the actual implementation of the assigned task Electronic Information Boards. Both hardware and software parts of the task, which form the majority of this thesis. At the end of the work are presented practical results.
|
guest ::
